Interesting links

• If you want to have more colour in your wardrobe, here are some very interesting tips, from Kasmira's What I Wore Today blog: Colour Yourself Happy
• How to pack a travel wardrobe, from the Wardrobe Oxygen blog
• What to do when... (getting a run in you stockings, are prone to losing buttons etc) from the same Wardrobe Oxygen
• Want to SWAP? Want to trade? Go to the SWAP and Trade forum on Supernaturale
• Want to design a nice-looking storyboard for planning a wardrobe? Want to see how a pattern would look in your actual fabric? Storyboard tute on Taking back the quality of my life blog.
• Cleaning your closet? Want to get items from other girls cleaning their closet? Go to MyGirlfriendCloset
• Planning some Fall SWAP-style sewing or see what others are planning for their wardrobe? Go to the thread on Artisan's Square
  

How I attach the collar to the jacket

Here's my method, which I like because it seems bulkless to me. It is a combination of several methods, some picked many years ago from the Burda illustrated course, some from sewing tips in a French magazine. I think it was Marie Claire but I'm not sure, this was 20 years ago!

First of all, my apologies because I forgot to take pictures at the beginning, therefore I must replace them with sketches.

1) If your pattern doesn't have a separate piece for the undercollar, make yourself one, by copying the upper collar and trimming 1/8 inches (3mm) all around. Sew the upper collar to the undercollar (my undercollar is cut on bias), stretching the trimmed undercollar to match the upper collar. Stop at the notches (marked with "stop here" on my drawing). Trim seam allowances if needed, turn, understitch and press. If you match the neckline seam on the uppercolar and undercollar, you will see that the uppercollar is bigger. Now fold that collar, still matching the neckline seams and put it around your neck. See now why the uppercollar is bigger? To adjust for the so called turn-of-cloth. The collar folds and rolls beautifully around your neck.


2) Sew the uppercollar to the facing (the collar's neckline seam to the facing neckline seam).



Trim, clip and press that seam open, like me:



3) Sew the undercollar to the jacket. Again, trim, clip, press open:



4) Sew the facings to the jacket.


5) Now, fold your collar and put one seam allowance of the uppercollar and one seam allowance of the undercollar together (the other two seam allowances are inside the collar). Sew those seam allowances together, either by hand or by machine (using a zipper foot in this case). Turn and press. Isn't it beautiful? Light and without bulk.




Peaking inside my WIP jacket... I've used Marcy Tilton's article for Threads, Armani jackets: The inside story:




I taped the lapel roll line with fusible tape, about 1.5 cm shorter than the roll line. The majority of the ease is in the middle third of the lapel line and the easing is done by steaming.

I stabilised the center front edges with 5/8 (1.6 cm) tape which is actually a lining selvedge. Tha tape was sewn with a basting stitch, without stretching. The tape is clipped at roll point, to allow the lapel to roll.

The armhole is stabilised with 1/4 (6 mm) twill tape - the tape is slightly stretched while sewn, thus forcing the armhole to "hug" the body - and at the shoulder, the seam allowance is pressed open for 2 inches (one on both sides of the shoulder point).



I'm also planning to attach a floating chest piece made out of canvas cut on the bias and a wigan strip (also cut on the bias) at the sleeve hem.

Stay put for the completed jacket and more inside pictures.

A very nice surprise...

I've been nominated by Lisa from Blackwater Park. What a nice surprise, I like her blog very much and find it so useful. And I really didn't know she reads my blog... Lisa, I'm honored to pass it on to (I can't keep track of everybody who's been nominated, sorry if it comes to you twice):
1) Isabelle from KittyCouture
2) Robin from Robin's Mostly Sewing Blog
3) Liana from Sew Intriguing
4) Rosanne from She's Sew Unusual
5) Sigrid from Sigrid's Sewing Projects

Happy sewing everyone!

Updated:
I've just discovered that I've been nominated also by Linda from Patterns, Fabric and Thread - Oh my. Linda, thank you very much, it's good to get good news twice on a Monday morning :)

I've got mail

As a bonus for subscribing to Burda WOF - Romanian version, I got the Burda supplement containing designer patterns (Burda Exclusiv Designer-Schnitte).

It contains the following patterns:

A top and skirt by Tristano Onofri




A suit by Orwell:



A trenchcoat and dress by Bogner



A trenchcoat by Aigner



Men's sportswear by Pal Zileri



And a gorgeous tuxedo jacket by Karl Lagerfeld



What's really nice is that the patterns come separately in a cardboard folder and they are ready to cut/trace, just like Big4 patterns or other patterns and not like the patterns in Burda WOF, where several different patterns are printed on the same sheet.

Learning from RTW: deconstructing a jacket

As I've told you, I took apart my favorite jacket. This jacket comes from a Romanian designer and it fits me beautifully. However, the fabric is horrible. 100% polyester, with quite a cheap look to it (this designer usually has beautiful fabrics, I don't know what happened this time). The advantage is it never wrinkles and you don't even have to iron it. The disadvantage... I completely hate it!
Therefore I took it apart, to copy the pattern and learn from the construction as well.

This is what the pattern pieces look like:



I forgot to take a picture of the jacket before taking it apart, but here is a photo of the half left, still in one piece, except for the collar:



As I already knew from Kathleen Fasanella, seam allowances are 1 cm (3/8 inches), the allowance of the seam joining the facing to the fronts and the lining to the hem is 0.6 cm (1/4).

What I've also noticed:

• The entire fronts are fused (but then I'm doing this all the time)
• The side panel is fused too, even if it extends into the back as well
• The back has a fused panel, covering the entire neckline and the armholes
• All the hems (back and sleeve) are fused and the interfacing extends past the foldline (I was doing that too)
• There are little cut slits instead of outward or inward notches
  
• THERE IS NO EASE IN THE SLEEVE CAP! But then, Kathleen Fasanella says that sleeve cap is bogus - see her post about it here. There was also a discussion on PR - go to Message Boards, Creative Sewing, and then Making Clothes Look Less Homemade - the discussion starts on page 11 of that thread. The sleeve looks perfectly OK and suits me perfectly.
  
• The sleeve cap is fused too! (I wasn't doing that nor was I ever instructed to do it) - see below what I'm talking about:

Also, I like very much the shoulder pad. It is the best I've ever had in a jacket. It gives shape without being too bulky (I have round defined shoulders and I really hate how I look with shoulder pads thicker than... let's say 1 cm).

See the pad below, compared to the best shoulder pads I can buy here (they are Italian and cost a bit more than 2 euros per pair, which is about 3 times more than "normal" shoulder pads):



Notice how the shoulder pad from the jacket doesn't have a symmetrical shape, like the bought one. The part going in the front is longer and thinner (lower part of photo), the one going in the back (upper part of photo) is shorter and fatter. Also, the pad is made out of three layers, assembled with pad stitching:



The bought pad is made out of foam, one layer and covered in soft knit mesh.

I'm thinking of making my own shoulder pads from now on. I must find foam for that. The foam piece in the picture above is thicker in the middle and thinner at the ends, but I can achieve this by layering several pieces of foam, in different sizes.

My houndstooth jacket from this pattern is coming along in a great way so far. I'm taking this opportunity to use all the tailoring techniques that I know of: shaping the lapel with an additional piece of interfacing and using stay tape for the lapel roll line; taping the fronts; adding a chest shield; adding a wigan strip to the sleeve hem; sewing the collar in a bulkless way etc.

When the jacket is finished, I'll post links to what I've found online about tailoring and also some pictures showing how I sew the collar to the jacket (a bulkless method, I think).

But... the International Salsa Congress starts tomorrow in Bucharest and it will keep me very busy.

Despite the pompous name, a salsa congress is an informal and fun event. You have workshops (about three simultaneous workshops in each time slot) the entire day, led by the greatest international instructors/dancers, and parties at night. People come from every corner of this world.

At the end of the congress (Sunday night) I'll probably be half dead, but it's definitely worth it!

Ta-daaa... first wardrobe piece

Between interfacing my houndstooth jacket (well, not jacket, pattern pieces) and trying to finish my red McCall jacket (I still have to hem the jacket, hem the sleeves, sew the buttons and sew the lining closed, but I really don't feel like it), I've finished my Modern Sewing lace up skirt. It seemed like quite an easy quick project and I wanted a pencil skirt therefore here it is.

Front



Back



Close-up of lacing detail



Read the pattern review written for PR here.

Updated storyboard and fabric photos

Storyboard version 1.1 :). I've decided to give up (or postpone sewing) one of the BWOF jackets and replace it with a copy from RTW - for this purpose, I undid my favorite jacket ever. It comes from a Romanian designer, it fits me beautifully (I'm sorry, but I forgot to take a picture before undoing it, pictures of the undone jacket will follow) and I hated the fabric of the jacket - therefore it was a perfect candidate for undoing and copying it. I've already cut it out of the houndstooth from TimmelFabrics, interfaced it and prepared it for sewing. I still have to cut the lining.



Fabrics: Top row, from left to right: Italian black suiting (wool, rayon, elasthane); houndstooth in silk and flax from TimmelFabrics; black cotton/lycra; dark grey suiting; off-white suiting
Second row, from left to right: light grey suiting; autumn red suiting; black and white krinkle cotton from TimmelFabrics; white stretch cotton; dark grey knit viscose/lycra; white cotton/lycra
Last row: white shirting; white and black stripped cotton/lycra.

Coat fabrics: red, white and black boucle from TimmelFabric; black stretchy wool; red mystery fabric



And now, my accent colours:

Red:


Yellow: I would like a jacket in the same shade, but it's absolutely impossible to find a doubleknit or suiting in that coulour :(



Emerald: I will buy a bag in the same shade. The fabric is a doubleknit.



Purple. The fabric is a knit.



Strings of fake pearls that will go very well with the retro trend of this season:



And before I go...
Have you ever seen a cat sleeping like mine??